Baby Proofing Installation in Charlotte NC — Professional Service
Baby proofing your Charlotte home? FixCraft VP installs safety gates, cabinet locks, outlet covers, furniture anchors, and corner guards. Professional installation that actually holds.
Baby proofing looks straightforward — until you're trying to mount a safety gate into a wall with no stud where you need one, or anchor a 200-pound bookshelf into drywall without the right hardware. Professional installation means the hardware holds when it needs to. Here's what's involved.
What We Install
Safety Gates Pressure-mounted gates work for some situations, but hardware-mounted gates — required at the top of stairs — need to go into studs or be properly bridged between them. We locate studs, use proper extension kits where needed, and install gates level and solid. Nothing shifts when a toddler pushes.
Cabinet Locks Magnetic cabinet locks require drilling into the inside of cabinet frames. Cheap surface-mounted latches get bypassed quickly. We install magnetic locks that require a key magnet to open — invisible from outside, effective inside.
Outlet Covers Tamper-resistant outlet replacements (code-required in new construction in NC) are better than plug covers that can become a choking hazard themselves. We swap outlets to TR receptacles throughout the home.
Furniture Anchoring IKEA dressers and bookshelves tip over and kill children — this is documented, not theoretical. Every tall piece of furniture should be anchored to the wall. We use proper toggle bolts or stud anchors rated for the weight. The IKEA BRIMNES, HEMNES, KALLAX, and PAX lines have specific anchor points — we know how they work.
Corner and Edge Guards For coffee tables and counters — adhesive-mounted foam or rubber guards on sharp corners. We install, trim, and make them look reasonable.
Door Pinch Guards Hinged door finger guards that prevent slammed doors from catching little fingers. Quick install, big impact.
What a Typical Baby Proofing Visit Costs
| Item | Cost | |---|---| | Safety gate installation (hardware-mounted) | $75–$120 per gate | | Furniture anchoring (per piece) | $35–$55 | | Cabinet lock installation (per cabinet) | $15–$25 | | Outlet replacement (TR receptacles, per outlet) | $15–$20 | | Full home baby proofing visit | $150–$350 |
Most Charlotte families need 3–5 gates, 2–4 furniture anchors, and cabinet locks throughout the kitchen and bathrooms. A full session runs 2–3 hours and costs $200–$350 all-in.
Why Professional Installation Matters
A gate that pulls out of the wall at the top of stairs is worse than no gate. A dresser anchor that pulls from drywall without hitting a stud fails in a tip-over. The value of professional installation is hardware that works under actual stress — not just when you test it gently.
Book at fixcraftvp.com or call 980-201-6705. We typically schedule within the week.
Related Articles
Ready to Book?
Same-day service available. Free quote in 30 minutes. Flat-rate pricing.
Get Your Free Quote